Measurement and verification (M&V) is the process of using measurements to determine the actual energy savings generated by energy management projects at individual sites. Common M&V activities include metering, data collection and processing, transparent savings calculations, monitoring, quality assurance, and third-party report verifications.
For those who want to get advanced M&V concepts, the two-day Advanced Measurement and Verification training program provides hands-on exercises and concepts that serve to complement and reinforce theoretical knowledge acquired through common M&V certification courses and designation.
On day 1, we recap the main features of M&V and focus on the use of various statistical tools for developing M&V plans, such as: sampling, linear regressions (including multivariable regressions), and uncertainty calculations. On day 2, we explore practical examples of International Performance Measurement and Verification Protocol (IPMVP) options for the following cases: lighting, motors and variable speed drives, compressed air, heat recovery systems, and commercial buildings. Participants also perform calculations for these cases. Finally, day 2 concludes with the development of an M&V plan.
If you are looking to increase your knowledge of the M&V process and the preparation or interpretation of plans, this program covers the statistical tools, examples, and case studies that are sure to help you develop your expertise.
CIET’s Pan-Canadian Virtual Course Schedule
|Other time zones|
(Central Time, SK MB)
(NB, NS, PEI, Lab.)
|Course starts!||9:00 AM||7:00 AM||8:00 AM||10:00 AM||11;00 AM||11:30 AM|
|Training||9:00 AM - 10:30 AM||7:00 AM - 8:30 AM||8:00 AM - 9:30 AM||10:00 AM - 11:30 AM||11:00 AM - 12:30 PM||11:30 AM - 1:00 PM|
|Morning Break||10:30 AM - 11:00 AM||8:30 AM - 9:00 AM||9:30 AM - 10:00 AM||11:30 AM - 12:00 PM||12:30 PM - 1:00 PM||1:00 PM - 1:30 PM|
|Training||11:00 AM - 12:30 PM||9:00 AM - 10:30 AM||10:00 AM - 11:30 AM||12:00 PM - 1:30 PM||1:00 PM - 2:30 PM||1:30 PM - 3:00 PM|
|Lunch Break||12:30 PM - 1:00 PM||10:30 AM - 11:00 AM||11:30 AM - 12:00 PM||1:30 PM - 2:00 PM||2:30 PM - 3:00 PM||3:00 PM - 3:30 PM|
|Training||1:00 PM - 2:30 PM||11:00 AM - 12:30 PM||12:00 PM - 1:30 PM||2:00 PM - 3:30 PM||3:00 PM - 4:30 PM||3:30 PM - 5:00 PM|
|Afternoon Break||2:30 PM - 3:00 PM||12:30 PM - 1:00 PM||1:30 PM - 2:00 PM||3:30 PM - 4:00 PM||4:30 PM - 5:00 PM||5:00 PM - 5:30 PM|
|Training||3:00 PM - 4:30 PM||1:00 PM - 2:30 PM||2:00 PM - 3:30 PM||4:00 PM - 5:30 PM||5:00 PM - 6:30 PM||5:30 PM - 7:00 PM|
|Course Ends/ Trainer Help Desk Opens!||4:30 PM||2:30 PM||3:30 PM||5:30 PM||6:30 PM||7:00 PM|
|Optional Help Desk (Q&As)||4:30 PM - 5:15 PM||2:30 PM - 3:15 PM||3:30 PM - 4:15 PM||5:30 PM - 6:15 PM||6:30 PM - 7:15 PM||7:00 PM - 7:45 PM|
Dragos Paraschiv is a licensed professional engineer in the Province of Ontario and a LEED Accredited Professional. His experience in energy efficiency includes several European Union projects in the field of energy management, where he was responsible for the development of community energy management plans and pilot projects. Working for a Canadian ESCO, Dragos was involved in the design of commercial mechanical systems, as well as central plants retrofit projects. Consulting services included load calculations, equipment selection, energy analysis, and preparation of tender documentation and construction site supervision. Dragos has gained experience in all aspects of Energy Performance Contracting including auditing, design, performance measurement and verification, contract administration and program management. Dragos has a Bachelor’s degree in Electrical Engineering and a Ph.D. in Power Engineering.
An M&V designation is not required but is strongly recommended.
Access to a private SharePoint website with additional training material, references, and links.
Send us an email and we will respond as soon as possible.