Overview

The training will be held in French.

 

This four-day advanced course on recommissioning (RCx) covers all the stages of the process: planning, investigation, implementation, hand-over and monitoring. These stages are presented in detail to allow trainees to develop a coherent understanding of the entire process and reap all anticipated benefits. The fundamental principles regarding the use of mechanical systems in buildings are discussed and good practices for testing and verification are examined to help trainees develop in-depth understanding of the investigation stage.

 

To share insight on how to maintain the benefits of the RCx process throughout the life cycle of buildings, the course not only teaches building operating staff on the persistence strategies to be implemented, but also highlights the appropriate interventions in energy monitoring to be carried out by third parties.

 

This CanmetENERGY (Natural Resources Canada) advanced course on recommissioning (RCx) has trained 75 professionals in the Province of Quebec. Upon course completion, trainees may choose to take a competency examination. The course and examination are both recognised by the Ministère de l'Énergie et des Ressources naturelles of Québec as part of the process of certifying recommissioning agents for mechanical systems in buildings.

 

Who should attend?

 

Targeted clients include experienced technical staff, such as:

  • Building recommissionning (RCx) service providers
  • Building operating staff
  • Energy managers
  • Engineering professionals with experience in HVAC systems, as well as commercial and institutional buildings operation.

 

This course is offered in collaboration with CanmetENERGY.

CanmetENERGY     

Agenda

The following topics are covered:

  • Effective methods for detecting problems
  • Working with the building staff
  • Calculating savings
  • Implementing RCx measures
  • Targeted documentation and training
  • Best practices for on-going commissioning

TRAINER(S)

Michel Parent
Eng., M.Sc.A.

Michel Parent has a Bachelor’s (Laval – 1986) and a Master’s degree (Waterloo – 1988, Solar Energy) in Mechanical Engineering. From 1988 to 1990, he was in charge of the Solar Laboratory at the National Institute of Scientific Research in Varennes. He then joined the Energy Group at the Industrial Research Center of Quebec from 1991 until 1996. Since 1996, M. Parent is a partner in a consulting engineering firm, Technosim, specializing in energy efficiency. Technosim has offices in Quebec and Ontario.

 

Mr. Parent is specialized in energy efficiency in the commercial, institutional and industrial sectors. He has performed numerous audits across North America, which were used in developing long term energy management plans. Mr. Parent is an Existing Building Recommissioning (EB Cx) Agent and has performed recommissioning for over 5 million square foot of office and retail properties across Canada. He is a certified Existing Building Commissioning Professional (EBCP). Mr. Parent is a lead trainer for the Advanced Recommissioning Course developed for the Canadian Federal Government. Mr. Parent is also a Certified Measurement and Verification Professional (CMVP) and has developed and implemented many M&V plans compliant with the IMPVP standard. He has also worked on M&T projects implementation to insure continuous improvements to building efficiencies within the context of his EB Cx projects. Mr. Parent has developed training modules for large corporate clients to insure persistence of savings following EB Cx projects as well as on-going improvements. Mr. Parent was also retained by OEE to develop and pilot the introductory recommissioning courses. Mr. Parent is also recognized as an expert energy simulator by LEED and has performed many LEED simulations as well as third party reviews of energy simulations. Mr. Parent has performed over 100 reviews of EE4/eQuest simulations, including many required for LEED submissions. Mr. Parent is a recognized LEED technical reviewer. He is one of the three trainers, recognized by the Office of Energy Efficiency (OEE), in the use of the simulation tool EE4 used for LEED applications. Furthermore, he was contracted by Natural Resources Canada to evaluate the possible adaptations and usefulness of using Portfolio Manager within the Canadian market as a recommissioning tool.

 

Mr. Parent has been involved with RETScreen since its initial development. He has been in charge of developing the ground source heat pump module for RETScreen as well as being a technical reviewer for the solar (air and water) heating module, the wind energy module and photovoltaic modules of the initial versions of RETScreen. Mr. Parent is also an experienced RETScreen user, having been using the tool since its initial development until today in numerous feasibility analysis studies for renewable energy and energy efficiency projects.

RECOGNITION

Toute organisation désireuse de réaliser un projet RCx et souhaitant obtenir une subvention du Ministère québécois de l’Énergie et des Ressources naturelles doit faire affaire uniquement avec un agent accrédité en remise au point des systèmes mécaniques des bâtiments. Ces agents doivent obligatoirement avoir suivi le cours avancé de remise au point des bâtiments de Ressources naturelles Canada offert par CIET, ou le Certified Building Commissioning Professsional (CBCP).


 


Gaz Métro exige que le projet soit réalisé par un agent accrédité en mise au point des systèmes mécaniques des bâtiments par le MERN, notamment ayant obtenu la certification RCx, dans le cadre de son programme de remise au point des système mécaniques des bâtiments.

CERTIFICATION PROCESS

Pour devenir un agent accrédité par TEQ


Toute personne désireuse de poser sa candidature comme agent accrédité doit :



  • Détenir une expérience en matière de mécanique de bâtiment et respecter l’une de ces exigences :


    • Être membre de l’Ordre des ingénieurs du Québec et titulaire d’un diplôme universitaire en ingénierie depuis au moins 5 ans;

    • Être membre de l’Ordre des technologues professionnels du Québec et titulaire d’un diplôme d’études collégiales depuis au moins 7 ans;



  • Avoir suivi le cours avancé reconnu par TEQ en matière de remise au point des systèmes mécaniques des bâtiments;

  • Avoir réussi l’examen d’évaluation des compétences en remise au point des systèmes mécaniques des bâtiments, reconnu par TEQ.


Elle doit déposer un formulaire de demande d’accréditation après avoir pris connaissance du document suivant :



Dans le cadre du présent programme, l’accréditation est attribuée à titre individuel aux ingénieurs et aux technologues professionnels qui satisfont aux exigences et qui réussissent l’examen d’accréditation.

The course includes...

  • On the first day of training, you receive your copy of the Advanced Recommisionning (RCx) Course workbook which is included in the course fee.
  • Please note that all breakfasts, lunches, as well as morning and afternoon coffee breaks are also included in the course fee.

POLICIES

If you are unable to attend the course, you may substitute another person in your place without penalty. All cancellations or postponements must be communicated to CIET by email at info@cietcanada.com.
 

  • Registrations cancelled more than 4 weeks prior to the course starting date: no penalty.
  • Registrations cancelled between 2 and4 weeks prior to the course starting date will be assessed an administration charge of $200.
  • Registrations cancelled 2 weeks or less prior to the course starting date will be assessed 50% of the registration fee.

$ Fees

Early bird fee $1,650
Regular fee
(After March 26, 2019)
$1,750
Continuing Education Units (CEU) 2.45
CSEP points 4+2 (for certification)
REGISTER NOW

LOCATION

Le Nouvel Hôtel & Spa
1740 René-Lévesque Ouest
Montréal, H3H 1R3
Phone:
Fax:

See on google maps
Loading Map....

Newsletter subscription

Share your training needs with us!

Would you like to be trained on a specific topic? Just let us know!

mailExpress my interest
Send us your question

Send us an email and we will respond as soon as possible.