Overview

Energy Efficiency Alberta covers 50% of the course fees for residents of Alberta only. The discount has already been applied on the listed fees.

 

This four-day advanced course on recommissioning (RCx) covers all the stages of the process: planning, investigation, implementation, hand-over and monitoring. These stages are presented in detail to allow trainees to develop a coherent understanding of the entire process and reap all anticipated benefits. The fundamental principles regarding the use of mechanical systems in buildings are discussed and good practices for testing and verification are examined to help trainees develop in-depth understanding of the investigation stage.

 

To share insight on how to maintain the benefits of the RCx process throughout the life cycle of buildings, the course not only teaches building operating staff on the persistence strategies to be implemented, but also highlights the appropriate interventions in energy monitoring to be carried out by third parties.

 

This CanmetENERGY (Natural Resources Canada) advanced course on recommissioning (RCx) has trained 75 professionals in the Province of Quebec. Upon course completion, trainees may choose to take a competency examination. The course and examination are both recognised by the Ministère de l'Énergie et des Ressources naturelles of Québec as part of the process of certifying recommissioning agents for mechanical systems in buildings.

 

Who should attend?

Targeted clients include experienced technical staff, such as:

  • Building recommissionning (RCx) service providers
  • Building operating staff
  • Energy managers
  • Engineering professionals with experience in HVAC systems, as well as commercial and institutional buildings operation.

 

This course is offered in collaboration with CanmetENERGY.

CanmetENERGY     

Agenda

The following topics are covered:

 

  • Effective methods for detecting problems
  • Working with the building staff
  • Calculating savings
  • Implementing RCx measures
  • Targeted documentation and training
  • Best practices for on-going commissioning

TRAINER(S)

Michel Parent
Eng., M.Sc.A.

Michel Parent has a Bachelor’s (Laval – 1986) and a Master’s degree (Waterloo – 1988, Solar Energy) in Mechanical Engineering. From 1988 to 1990, he was in charge of the Solar Laboratory at the National Institute of Scientific Research in Varennes. He then joined the Energy Group at the Industrial Research Center of Quebec from 1991 until 1996. Since 1996, M. Parent is a partner in a consulting engineering firm, Technosim, specializing in energy efficiency. Technosim has offices in Quebec and Ontario.

 

Mr. Parent is specialized in energy efficiency in the commercial, institutional and industrial sectors. He has performed numerous audits across North America, which were used in developing long term energy management plans. Mr. Parent is an Existing Building Recommissioning (EB Cx) Agent and has performed recommissioning for over 5 million square foot of office and retail properties across Canada. He is a certified Existing Building Commissioning Professional (EBCP). Mr. Parent is a lead trainer for the Advanced Recommissioning Course developed for the Canadian Federal Government. Mr. Parent is also a Certified Measurement and Verification Professional (CMVP) and has developed and implemented many M&V plans compliant with the IMPVP standard. He has also worked on M&T projects implementation to insure continuous improvements to building efficiencies within the context of his EB Cx projects. Mr. Parent has developed training modules for large corporate clients to insure persistence of savings following EB Cx projects as well as on-going improvements. Mr. Parent was also retained by OEE to develop and pilot the introductory recommissioning courses. Mr. Parent is also recognized as an expert energy simulator by LEED and has performed many LEED simulations as well as third party reviews of energy simulations. Mr. Parent has performed over 100 reviews of EE4/eQuest simulations, including many required for LEED submissions. Mr. Parent is a recognized LEED technical reviewer. He is one of the three trainers, recognized by the Office of Energy Efficiency (OEE), in the use of the simulation tool EE4 used for LEED applications. Furthermore, he was contracted by Natural Resources Canada to evaluate the possible adaptations and usefulness of using Portfolio Manager within the Canadian market as a recommissioning tool.

 

Mr. Parent has been involved with RETScreen since its initial development. He has been in charge of developing the ground source heat pump module for RETScreen as well as being a technical reviewer for the solar (air and water) heating module, the wind energy module and photovoltaic modules of the initial versions of RETScreen. Mr. Parent is also an experienced RETScreen user, having been using the tool since its initial development until today in numerous feasibility analysis studies for renewable energy and energy efficiency projects.

Dragos Paraschiv

Dragos Paraschiv is a licensed professional engineer in the Province of Ontario and a LEED Accredited Professional. His experience in energy efficiency includes several European Union projects in the field of energy management, where he was responsible for the development of community energy management plans and pilot projects. Working for a Canadian ESCO, Dragos was involved in the design of commercial mechanical systems, as well as central plants retrofit projects. Consulting services included load calculations, equipment selection, energy analysis and preparation of tender documentation and construction site supervision. Dragos has gained experience in all aspects of Energy Performance Contracting including auditing, design, performance measurement and verification, contract administration and program management. Dragos has a Bachelor degree in Electrical Engineering and a PhD in Power Engineering.

The course includes...

  • On the first day of training, you receive your copy of the Advanced Recommisionning (RCx) Course workbook which is included in the course fee.
  • Please note that all breakfasts, lunches, as well as morning and afternoon coffee breaks are also included in the course fee.

POLICIES

If you are unable to attend the course, you may substitute another person in your place without penalty. All cancellations or postponements must be communicated to CIET by email at info@cietcanada.com.

  • Registrations cancelled more than 4 weeks prior to the course starting date: no penalty.
  • Registrations cancelled between 2 and 4 weeks prior to the course starting date will be assessed an administration charge of $200.
  • Registrations cancelled 2 weeks or less prior to the course starting date will be assessed 50% of the registration fee.

$ Fees

Regular fee
$880 (discounted fee for Albertans only)
Continuing Education Units (CEU) 2.45
CSEP points 4+2 (for certification)
REGISTER NOW
REGISTER NOW

LOCATION

Radisson Hotel Edmonton South
4440 Gateway Blvd
Edmonton, T6H 5C2
Phone: (780) 437-6010
Fax: (780) 431-5802

See on google maps
Loading Map....

Newsletter subscription

Share your training needs with us!

Would you like to be trained on a specific topic? Just let us know!

mailExpress my interest
Need help ?

Send us an email and we will respond as soon as possible.