Overview

You should know that :

  • The training will be held in French.
  • The course will begin at 9:00 am and end at 4:30 pm each day, according to EST or Eastern Standard Time (UTC-05:00 US & Canada).
  • We will be using GoToTraining platform which has great interactive features.
  • We will include dedicated time for questions.
  • We will take breaks, just as in a real classroom.
  • We will alternate trainers to ensure the course changes pace during the week.
  • You will receive the login details by email upon registering to the course.
  • We recommend that you use computer audio, rather than connection by phone if possible as well as headphones to avoid sound feedback.
  • The open book knowledge exam will be administered online remotely during the afternoon of the last day. Just before it starts, you will receive an email with a Onedrive link containing the exam that will be non-downloadable and password protected.

 

This four-day advanced course on recommissioning (RCx) covers all the stages of the process: planning, investigation, implementation, hand-over and monitoring. These stages are presented in detail to allow trainees to develop a coherent understanding of the entire process and reap all anticipated benefits. The fundamental principles regarding the use of mechanical systems in buildings are discussed and good practices for testing and verification are examined to help trainees develop in-depth understanding of the investigation stage.

 

To share insight on how to maintain the benefits of the RCx process throughout the life cycle of buildings, the course not only teaches building operating staff on the persistence strategies to be implemented, but also highlights the appropriate interventions in energy monitoring to be carried out by third parties.

 

This CanmetENERGY (Natural Resources Canada) advanced course on recommissioning (RCx) has trained 75 professionals in the Province of Quebec. Upon course completion, trainees may choose to take a competency examination. The course and examination are both recognised by the Ministère de l'Énergie et des Ressources naturelles of Québec as part of the process of certifying recommissioning agents for mechanical systems in buildings.

 

Who should attend?

 

Targeted clients include experienced technical staff, such as:

  • Building recommissionning (RCx) service providers
  • Building operating staff
  • Energy managers
  • Engineering professionals with experience in HVAC systems, as well as commercial and institutional buildings operation.

 

This course is offered in collaboration with CanmetENERGY.

CanmetENERGY     

Agenda

Training Schedule (click the image to see it in full screen)

 

 

There will be an optional but appreciated 45-min informal networking session at the end of the first day so you can get to know your fellow participants better; it starts after the Q&A at around 5:15 pm EST.

 

 

The following topics are covered:

  • Effective methods for detecting problems
  • Working with the building staff
  • Calculating savings
  • Implementing RCx measures
  • Targeted documentation and training
  • Best practices for on-going commissioning

TRAINER(S)

Michel Parent, CIET Canada, headshot
Michel Parent
Eng., M.Sc.A.

Michel Parent has a Bachelor’s (Laval – 1986) and a Master’s degree (Waterloo – 1988, Solar Energy) in Mechanical Engineering. From 1988 to 1990, he was in charge of the Solar Laboratory at the National Institute of Scientific Research in Varennes. He then joined the Energy Group at the Industrial Research Center of Quebec from 1991 until 1996. Since 1996, M. Parent is a partner in a consulting engineering firm, Technosim, specializing in energy efficiency. Technosim has offices in Quebec and Ontario.

 

Mr. Parent is specialized in energy efficiency in the commercial, institutional and industrial sectors. He has performed numerous audits across North America, which were used in developing long term energy management plans. Mr. Parent is an Existing Building Recommissioning (EB Cx) Agent and has performed recommissioning for over 5 million square foot of office and retail properties across Canada. He is a certified Existing Building Commissioning Professional (EBCP). Mr. Parent is a lead trainer for the Advanced Recommissioning Course developed for the Canadian Federal Government. Mr. Parent is also a Certified Measurement and Verification Professional (CMVP) and has developed and implemented many M&V plans compliant with the IMPVP standard. He has also worked on M&T projects implementation to insure continuous improvements to building efficiencies within the context of his EB Cx projects. Mr. Parent has developed training modules for large corporate clients to insure persistence of savings following EB Cx projects as well as on-going improvements. Mr. Parent was also retained by OEE to develop and pilot the introductory recommissioning courses. Mr. Parent is also recognized as an expert energy simulator by LEED and has performed many LEED simulations as well as third party reviews of energy simulations. Mr. Parent has performed over 100 reviews of EE4/eQuest simulations, including many required for LEED submissions. Mr. Parent is a recognized LEED technical reviewer. He is one of the three trainers, recognized by the Office of Energy Efficiency (OEE), in the use of the simulation tool EE4 used for LEED applications. Furthermore, he was contracted by Natural Resources Canada to evaluate the possible adaptations and usefulness of using Portfolio Manager within the Canadian market as a recommissioning tool.

 

Mr. Parent has been involved with RETScreen since its initial development. He has been in charge of developing the ground source heat pump module for RETScreen as well as being a technical reviewer for the solar (air and water) heating module, the wind energy module and photovoltaic modules of the initial versions of RETScreen. Mr. Parent is also an experienced RETScreen user, having been using the tool since its initial development until today in numerous feasibility analysis studies for renewable energy and energy efficiency projects.

RECOGNITION

Toute organisation désireuse de réaliser un projet RCx et souhaitant obtenir une subvention du Ministère québécois de l’Énergie et des Ressources naturelles doit faire affaire uniquement avec un agent accrédité en remise au point des systèmes mécaniques des bâtiments. Ces agents doivent obligatoirement avoir suivi le cours avancé de remise au point des bâtiments de Ressources naturelles Canada offert par CIET, ou le Certified Building Commissioning Professsional (CBCP).

 

Gaz Métro exige que le projet soit réalisé par un agent accrédité en mise au point des systèmes mécaniques des bâtiments par le MERN, notamment ayant obtenu la certification RCx, dans le cadre de son programme de remise au point des système mécaniques des bâtiments.

CERTIFICATION PROCESS

For more information on the Rcx Agent Certification process, please visit the Remise au point des sytèmes mécaniques de bâtiments page at Transition énergétique Québec.

The course includes...

  • If you register before 12 pm EST, Thursday November 5, 2020 you will receive the printed training material at your home or office before the course starts.

POLICIES

If you are unable to attend the course, you may send another person in your stead without incurring any penalty. CIET must be advised of any replacement, cancellation or postponement via email at info@cietcanada.com.

 

The following fees apply for:

  • Rescheduling your registration to another course:
    • At least 2 weeks prior to the start of the course: no fee;
    • Less than 2 weeks prior to the start of the course: $50 administrative fee;
    • No show (after the beginning of the course): 15% of regular course fees.
  • Cancelling your registration :
    • At least 2 weeks prior to the course : no fee;
    • Less than 2 weeks prior to the course: $150 administrative fee or 10% of regular course fees (whichever is greater);
    • No show (after the beginning of the course): 25% of regular course fees.

$ Fees

Early bird fee $1,650
Regular fee
(After September 22, 2020)
$1,750
Continuing Education Units (CEU) 2.3
CSEP points 4+2 (for certification)
REGISTER NOW

LOCATION

Classe virtuelle en temps réel – HNE
GoToTraining
,
Phone:
Fax:

See on google maps Map Unavailable

Share your training needs with us!

Would you like to be trained on a specific topic? Just let us know!

mailExpress my interest

Certified Energy Auditor (CEA)

Certified Energy Manager (CEM)

Certified Measurement and Verification Professional (CMVP®)

Certified RETScreen® Expert (CRE)

Advanced Course on Building Recommissioning (RCx)

Introduction to RCx for Building Owners & Managers – Dollars to $ense Workshop

Certified Building Commissioning Professsional (CBCP)

Energy Efficiency for Building Operators & Maintenance Staff

1-Day Energy Efficiency for Building Operators & Maintenance Staff (EEBO) – Dollars to $ense Workshop

Building Operator Certification Training (BOC)

Energy Management Professional 101 (EMP 101)- Dollars to $ense Workshop

Prep Course for the NRCan Foundation Level Exam

Prep Course for the NRCan ERS v15 Energy Advisor Exam

Heat Integration of Industrial Processes (HIIP)

Introduction to Building Energy Modelling in Compliance with the NECB

Building Energy Modelling Professional – Tools, Software and Compliance

Building Automation Systems Optimization Essentials – Dollars to $ense Workshop

Advanced Building Automation Systems Optimization – Dollars to $ense Workshop

Making the Case for Energy Efficiency – Dollars to $ense Workshop

Dollars to $ense Energy Management Workshops

1-Day Best Practices of ICI Energy Management – Dollars to $ense Workshop

Fundamentals of Compressed Air Systems

Advanced Management of Compressed Air Systems

Advanced Measurement and Verification

Other course

Send us your question

Send us an email and we will respond as soon as possible.

COVID-19 Information for CIET Fall 2020 Training Calendar – CIET Goes Virtual!

Last Updated: September 18, 2020

 

CIET Goes Virtual!

With more than 60 virtual real-time courses offered since the beginning of the COVID-19 crisis under our belt, and based on feedback received from more than 600 participants, CIET is happy to inform that all public training sessions offered in the fall of 2020 will be delivered through virtual real-time classrooms.

This will allow everyone to continue accessing CIET training in a safe manner, which protects both our participants and our trainers, regardless of what happens in the fall. You can register for these virtual courses in confidence, knowing that they will provide the same quality of training that you expect from CIET. These real-time training sessions will be available to all participants across Canada, and abroad.

 

REGISTER FOR VIRTUAL TRAINING TODAY!

 

You can find more information about CIET’s virtual training approach:


Through all these measures, CIET hopes to provide as much flexibility as possible to training participants while respecting its commitments to other participants, trainers and partners, as well as public health recommendations.

We thank you very much for your trust and collaboration and look forward to welcoming you in our virtual classrooms!

 

Best regards,

The CIET Team
info@cietcanada.com
647 255-3107